NLZ Electric Motor with Endodontic Function

Less Heat

NLZ employs a simple non-layered coil instead of a standard layered coil. The coils are as compact as possible, shortening the pathway for heat generating current. As a result, it generates less heat without reducing the output power.

Simplified Pipe Configuration

Conventional products include several pipes, which crank the water flow supplied from the rear of the motor. The NLZ uses a simple straight pipe design instead of a crank, reducing the risk of water clogging in the rear section of the motor.

Contaminants Are Stopped by a Microfilter

There is a water filter with a 0.3 mm diameter mesh fitted within the tubing connector at the back of the main unit to catch debris and foreign particles in the water and prevent clogging.

Endo Torque Calibration Function

Performing the “Contra-Check Function” also enables torque calibration. This function measures the no-load current values and corrects the torque accordingly, greatly enhancing safety in endodontic treatment.

*This function cannot completely absorb the individual differences of the actual motor and contra-angles.

Specifications

• Motor Type: Brushless Micromotor
• Max Torque: 4.2 Ncm
• Endodontics Torque: 0.3-6.0 Ncm (Depending on Gear Ratio)
• Motor Speed: 100-40,000 min^-1
• Dimension: Ø22 x H 68.8 mm
• Weight: 59 g (Motor Only)
• Light: White LED